Description

Description
A special product from the LITHOFIN-Range for
ceramic and porcelain tiles (KF). Lithofin KF StainStop is a water based nearly odourless impregnator consisting of a combination of high quality water and oil resistant components.

Properties
This special impregnator effectively protects the surface
against staining by inhibiting the penetration of water,
oil, grease and dirt. Lithofin KF Stain-Stop does not
affect the appearance of the surface.

Technical Data:
Density: approx. 1,0 g/cm³
pH-Value: 3 to 6
Appearance: liquid, yellowish, clear
Odour: non specific
Flash Point: approx. 36°C
Solubility in Water: —

Field of Use
For protecting all newly laid absorbent polished and
unglazed porcelain tiles in order to facilitate
maintenance. Suitable for indoor and outdoor use.

Directions for Use
The surface to be treated must be completely clean
and dry. Shake Lithofin KF Stain-Stop well before use.
Apply undiluted with a clean cloth or a lamb’s wool
roller and ensure even distribution by wiping (rolling)
over the surface several times.
For best results, treat the surface in sections of
approx. 15m² at a time. After 20 minutes, completely
remove any surface residues with a squeegee and
then with a dry cloth.
Attention! the liquid product must sink into the stone.
Immediately wipe off puddles and drips. Do not allow
the product to dry on the surface. Carefully remove
all residues and check against back light.
Please Note: impregnators are not suitable for all
porcelain tiles. Always try the product in an
inconspicuous area
prior to use. Protect glass, varnished surfaces,
plastics, etc. against splashes.
Coverage:
up to 40m² per litre, depending on the absorbency
of the surface.

Storage
Keep closed, cool and dry.
Shelf life of approx. 2 years. Open containers should
be used quickly.
Environmental Protection
Solvent free, water based.
Disposal: diluted product may be added to waste
water. Containers are made of environmentally
friendly polyethylene (PE). Clean containers can be
recycled through collection systems.

Safety
Ingredients: Polymers, auxiliary agents.
Keep out of the reach of children. Treated surfaces
present no health hazard once dry.

MSDS (lithofin.com)

AUS-NZ-183 8.15 (lithofin.com)