Description

Description
Lithofin OIL-EX is a ready-to-use, gel-like paste
consisting of a mixture of solvents and highly
absorbent solids.

Technical Data:
Density: approx. 0.8 g/cm³
pH-Value: n.a.
Appearance: paste, whitish
Odour: aromatic
Flash Point: > 27°C
Solubility in Water: —

Properties
Lithofin OIL-EX dissolves and absorbs oil and oil
based dirt. Its paste like consistency enables the
active ingredients to work on the substrate for a
long time, so that even deeply ingrained dirt can be
successfully removed.

Field of Use
For removing oil stains or grease based dirt from
marble, natural and artificial stone, concrete, etc.
Ideal for kitchen work tops, garage entrances and
similar areas.

Directions for Use
Remove solids and surface soiling mechanically using
a scraper or a brush. Apply Lithofin OIL-EX to the dry
surface using a spatula, so that a coating thickness of
at least 2mm is achieved. Allow to dry for
approximately 12 hours. The remaining powder can
be brushed off after complete drying.
Please Note: some dark natural stone can show small
amounts of the powder in the porous surface. If this
happens please clean with Lithofin MN Power-Clean.
Deeply ingrained dirt can be removed by 2 or 3
applications of the product. The active working time
of the product can be prolonged by covering the area
with plastic film. Do not apply under 10°C or over
25°C. Do not use on surfaces which are sensitive to
solvents, lacquered, coated or synthetic surfaces.
It is recommended to try the product on a small area
in an inconspicuous place.

Coverage:
approx. 0.5m² / kg for 2 mm application thickness
Advice: we recommend impregnating stain sensitive
stone and concrete areas with Lithofin MN Stain-Stop.
For regular maintenance use Lithofin MN Wash &
Clean or Lithofin EASY-CARE.

Storage
Store in cool and dry conditions. Keep tube closed.
Shelf life of up to two years.
Environmental Protection
Contains solvents, does not contain chlorinated
hydrocarbons. Do not dispose of in drains.
Disposal: The dried powder can be disposed of in an
environmentally friendly way at the collection point for
special waste.
Waste description: oil and grease containing solids.
Large quantities should be disposed of in a registered
facility for special waste.
Clean containers can be recycled through collection
systems.

Safety
Contents: hydrocarbons, absorbent solids.
Labelling according to EU-Directive 1272/2008(CLP):
Symbol GHS 02, 07, 09 Attention
Extremely flammable liquid and vapour. May cause
drowsiness or dizziness. Toxic to aquatic life with long
lasting effects. Repeated exposure may cause skin
dryness or cracking. Contains limonene. May produce
an allergic reaction. Keep out of the reach of children.
Keep away from heat/sparks/open flames/hot
surfaces. – No smoking. Use only outdoors or in a
well-ventilated area.

MSDS (lithofin.com)

GB-187 11.15 (lithofin.com)