Description

Solv Sealer Gold is a premium solvent-based impregnating sealer formulated with advanced nano-molecule fluorochemical technology. Its ultra-small molecules penetrate deep into porous stone and masonry, delivering long-lasting protection against water, oil, stains, efflorescence, mould, mildew and weathering — without altering the surface’s natural appearance.

Independently tested by a NATA-approved stone laboratory, Solv Sealer Gold delivers professional-grade protection for up to 15 years across residential, commercial and outdoor applications.

Colour: Clear (Water White) | Base: Solvent Based | pH: N/A | Fragrance: Solvent | Dilution: Ready to use | Safety Profile: Class 3 Flammable | Pack Sizes: 5Lt & 15Lt

BENEFITS

• Advanced Nano Penetration — specialised nano-sized fluorochemical molecules penetrate deeply into dense and fine-pore surfaces for superior internal protection
• Long-Term Stain Resistance — protects against oil and grease, food and beverage stains, water penetration, dirt, pollution, mould, mildew, efflorescence and salt attack
• Natural Appearance — leaves no visible coating, preserving the original colour, texture and slip resistance of the surface
• Safe for Fine Stone — will not etch or discolour marble, limestone or other delicate natural stones
• Breathable Protection — allows moisture vapour to escape while preventing liquid penetration
• Premium Protection — provides up to 15 years of protection under normal conditions

APPLICATION AREAS AND SURFACE SUITABILITY

Solv Sealer Gold is suitable for a wide range of porous natural stone and masonry surfaces including:

• Granite, Marble, Limestone, Travertine
• Bluestone, Basalt, Sandstone, Slate
• Terrazzo, Terracotta, Saltillo Tiles, Quarry Tiles
• Concrete, Masonry, Brick, Cement-based grout
• Porous engineered stone

Suitable for polished, honed, flamed, exfoliated and saw-cut finishes.

Expected Wear: Provides protection for up to 15 years under normal conditions. Reseal every 5–7 years in high-traffic or harsh environments. Clean regularly using Actichem Proneutro or a pH-neutral stone cleaner — avoid harsh acids, strong alkalis and solvent cleaners to maximise sealer performance.

Considerations:

• Not suitable as a waterproof membrane or sub-surface waterproofing system
• Do not apply when rain is expected within 2 hours of application
• If the surface has recently been exposed to rain, allow at least 24 hours of drying before application

Coverage Guide:

Very porous materials may require two or more coats.

HOW TO USE

Read and understand the Safety Data Sheet (SDS) before use. Always perform a small test patch before full application.

Surface Preparation:

• Ensure surfaces are clean, dry and free from contaminants
• New installations should cure for at least 48 hours (some concrete may require up to 7 days)
• Do not apply in direct sunlight; surface temperature should be between 10°C and 28°C

DILUTION

Ready to use. No dilution necessary.

APPLICATION

1. Prepare the product as supplied (ready to use).
2. Apply generously using a roller, sprayer or applicator.
3. Keep the surface evenly wet for at least one minute.
4. Allow the sealer to penetrate for 5–10 minutes, moving excess product onto the next section with a squeegee.
5. If required, apply a second coat after 20–30 minutes.
6. Remove any remaining residue with absorbent towels — for dried residue, wipe with Methylated Spirits.
7. Keep the area dry for 24 hours. Light foot traffic is permitted after 12 hours. Full cure achieved within 24–48 hours.

Frequently Asked Questions

Does Solv Sealer Gold change the appearance of stone?
No — it is an impregnating sealer that preserves the natural colour, texture and finish of the surface.

Can it be used outdoors?
Yes — it is suitable for both indoor and outdoor use on natural stone, concrete, pavers and masonry.

How long does the protection last?
Under normal conditions, Solv Sealer Gold provides protection for up to 15 years, depending on traffic, weather exposure and maintenance.

Can it be used on polished marble?
Yes — it is safe for polished marble, granite, limestone, travertine and other fine natural stones.

What cleaner should be used afterwards?
For best long-term performance, use a pH-neutral cleaner such as Actichem Proneutro.

solv-selaer-gold.pdf