Description

Actichem Solv Strip is a new generation solvent-based floor coatings stripper engineered to work quickly and effectively — saving professional cleaners valuable time and labour. Possibly the most advanced solvent-based stripper on the market today, Solv Strip is specifically designed to tackle tough solvent sealers and polish build-ups on resilient flooring including terracotta, terrazzo and concrete.

A remarkable achievement in coatings removal technology, Solv Strip begins liquefying coatings on contact — delivering serious stripping action with minimal scrubbing required.

Colour: Clear (Water White) | pH: N/A | Fragrance: Solvent | Dilution: Ready to use | Safety Profile: Class 3 Flammable | Pack Sizes: 5Lt & 15Lt

BENEFITS

• Power-Packed — serious stripping action on solvent-based coatings, burnish build-ups and semi-permanent sealers
• Fast Action — begins to liquefy coatings immediately on contact with the surface
• Labour Saving — minimal scrubbing required, significantly reducing time and labour costs
• Free Rinsing — exceptionally easy to rinse slurry and residues for a clean finish

APPLICATION AREAS AND SURFACE SUITABILITY

Solv Strip is safe for use on most resilient floors, quickly softening and emulsifying old, worn and discoloured finishes for easy removal. Ideal for removing solvent sealers, base sealers and polish build-ups from natural stone, concrete and terrazzo.

⚠️ Do not use on wood, vinyl, linoleum or plastic flooring.

HOW TO USE

Read and understand the Material Safety Data Sheet (MSDS) before use. Always pre-test in an inconspicuous location for substrate sensitivity prior to full application.

DILUTION

Ready to use. Do not dilute.

APPLICATION

1. Sweep the area thoroughly to remove any soiling that could damage the floor if caught under scrubbing equipment.
2. Apply Solv Strip liberally to the floor area with a cotton mop, ensuring the surface is thoroughly wet. Always work in small, controllable area sizes.
3. Allow at least 5 minutes dwell time, then agitate with a low-speed rotary scrubber or autoscrubber fitted with a black, brown or high productivity pad.
4. Ensure the area does not dry out on the surface during the process.
5. After scrubbing, pick up slurry and rinse thoroughly with clean water to ensure all stripper and sealer residues are completely removed.
6. Allow the floor to dry before commencing the restoration process. Re-strip any areas that still have polish build-up or were missed in the first application.

actichem-solv-strip.pdf