Description

Description

Stone Sealer Gold is a premium water-based penetrating sealer developed to provide long-lasting protection for marble, limestone, travertine, granite, and bluestone. Using a blend of nano-sized fluorochemical technology and specialist penetrating solvents, it penetrates deep into dense substrates to create a highly repellent surface that guards against water, oil, and general contaminants — all while preserving the stone’s natural look, texture and slip characteristics.

Independently performance-tested by a NATA-approved laboratory, Stone Sealer Gold delivers up to 15 years of durable protection and meets the Green Building Council of Australia’s Green Star Design V3 IEQ-13 requirements — making it a trusted choice for both residential and commercial applications.

Colour: N/A | pH: N/A | Fragrance: None | Dilution: Ready to use | Safety Profile: Non-hazardous, free from chlorinated hydrocarbons and not classified as a suspected carcinogen

BENEFITS

• Premium Protection — delivers up to 15 years of protection, independently performance-tested by a NATA-approved laboratory
• Precise Chemistry — nano-sized fluorochemical technology combined with specialist penetrating solvents for deep penetration into dense substrates
• Comprehensive Protection — guards against water and oil-borne contaminants, including food and beverage stains, oil and grease spills, mould and mildew, spalling, efflorescence, pollution and weathering
• Versatile Application — water-based formula ensures easy application across a wide range of substrates
• Natural Look — maintains the stone’s original appearance without altering texture, slip characteristics or colour
• Surface Safe — will not etch or discolour marble or other fine stones
• Vapour Permeable — allows natural stone to “breathe,” preventing moisture entrapment
• Safe to Use — free from chlorinated hydrocarbons and not classified as a suspected carcinogen

APPLICATION AREAS AND SURFACE SUITABILITY

Formulated to provide premium protection from staining on medium to high porosity fine stone, masonry, clay and cement products. Ideal applications include:

• Marble, Limestone, Travertine
• Sandstone & Bluestone
• Cement & Clay Pavers
• Terracotta, Saltillo, Quarry

Ideal for all interior and exterior applications, with excellent protection for fine stone flooring and walls, outdoor stone features, patios, walkways, and concrete and clay paving.

Expected Wear: Provides excellent protection for up to 15 years. Application methods, weather conditions, traffic and harsh cleaning methods will affect wear. Avoid use of solvents, strong acids and strong alkalis to extend sealer life. Cleaning with Actichem Proneutro is recommended. Re-application every 5–7 years is advised where harsh conditions exist.

Considerations:

• Not to be used as sub-terrain waterproofing
• Do not apply if temperature exceeds 40°C or if rain is expected within 2 hours of application
• If rain has preceded application, allow the surface 24 hours to dry completely

Approx. Coverage:

Note: Application on large concrete areas should be based on a preset coverage rate using a dedicated sprayer or painting equipment — no subsequent removal of excess product is required.

HOW TO USE

Read and understand the Safety Data Sheet (SDS) before use. Always pre-test in an inconspicuous location for substrate sensitivity prior to full application.

Surface Preparation:

• New installations must be fully cured before application (minimum 48 hours; some concrete installations may require up to 7 days — confirm with the structural engineer)
• Existing stone and grout must be totally clean, dry and chemical free
• Do not apply in direct sunlight; temperature must be between 10°C and 28°C
• Highly absorbent surfaces may require two coats

DILUTION

Ready to use. Do not dilute.

APPLICATION

Apply 1 to 3 coats of Stone Sealer Gold by generously saturating the surface using a polish applicator, roller or sprayer. Work in manageable sections of approximately 15m².
Ensure even coverage across the treated area.
The surface must remain shiny wet with a liquid film for at least 1 minute. Apply additional sealer to very porous substrates as needed.
Allow 5–10 minutes for the sealer to absorb, then move excess product with a squeegee to a new section.
If applying a second coat, wait 20–30 minutes and repeat the process.
Using absorbent towelling or an applicator, wipe off any sealer remaining on the surface after 10 minutes of the last application. Moisten the towel with Methylated Spirits to remove any dried residues.
Allow 12 hours before returning the area to traffic. Keep dry for 24 hours. Full cure achieved in 24–48 hours.