Surface Preparation

The surface should be dry, clean and free of waxes, sealers or finishes. New installations need to be dry 24 hours before application. Protect surrounding surfaces. Test product in an inconspicuous area to ensure desirable results. The Stone, Tile or Grout must be dry prior to applying sealer – the following document explains in detail the definition of the term “dry” as it relates to sealer application.

Procedure

• WEAR IMPERVIOUS GLOVES, such as nitrile, and eye protection when handling product.
• Read entire label before using.
• Shake container well before use.
• ALWAYS test a small and less conspicuous area before use.

1. Apply a liberal coat using a paint pad applicator, sponge, brush, or airless sprayer. Ensure the entire surface has been treated.
2. If applying to a dense, polished, or honed surfaces, use a white nylon scrub pad to lightly work the sealer into the surface before it is absorbed.
3. Allow the sealer to penetrate for up to 5 minutes or until the sealer begins to dry.
4. Wipe the surface with a clean damp microfiber towel. Then buff with a dry microfiber towel until dry.
5. Apply the second coat, after a minimum of 30 minutes, by repeating steps 1 through 4. •

• Do not allow light foot traffic until 30 minutes after the final dry buff.
• Keep dry for 24 hours after application.
• Sealer will achieve maximum stain protection after 24 hours.